| |
R8 Collet for Milling : |
| |
Sikka Manufactures R-8 collets for milling machines. R-8 Collet is used for clamping the cutter,drill etc. R-8 Collet is also known as M1TR collet. We have a wide range of tequar collets in our stock.The collets are ready in two type of threads,one is of 12x1.5MM and other one is of 1/2bsw thread.
We can also manufacture all special milling collet as per drawing or sample.
|
| |
|
| |
Advantage of Sikka r-8 collet |
| |
1 .Superb quality with spring steel material.
2. Concentricity of the collet is 0.005mm.
3. Well hardened and grinded collet by which the life of the machine's spindle will be longer.
4. Taper degree is confirmed and accurate to control the concentricity. |
| |
|
| |
|
| |
|
| |
|
| |
Type |
ØD |
L |
G |
T° |
Ød |
Range |
R8 |
31.75 |
106 |
12x1.5MM |
8° |
24.10 |
2-25 |
R-8 |
31.75 |
106 |
1/2'BSW |
8° |
24.10 |
2-25 |
|
| |
|
| |
|
| |
We manufacture quality R8 collet. R8 collet is basically used in metal work. Here at Sikka, our manpower is consistently producing R8 collet. R8 collets are available in both metric and inch sizes. R8 collets are available in metric and inch sizes as well. R8 collets facilitate changing the tools rapidly. R8 collets are used in milling machines, as holding device, as machining centers etc. R8 collets are manufactured using quality raw materials that ensure the good durability of R8 collet. This r8 collet as we know is used in milling machines. |
